減少二手電動叉車的磨損的方法有哪些？
時間：2021-06-09
點擊：897次
減少二手電動叉車的磨損的方法有哪些？
what are the methods to reduce the wear of used electric forklift？
1、加強對輪胎的維護。為了走遠路人們會選擇舒適耐磨的鞋子，那么叉車如果想要維護好，對輪胎的維護至關重要，要做到“四勤”：
1. strengthen the maintenance of tires. in order to walk a long way, people will choose comfortable and wear-resistant shoes. if forklift wants to maintain well, it is very important to maintain the tires, and "four diligence" should be achieved
(1)勤塞小洞，要及時檢查輪胎割破、開裂等情況。
(1) frequently plug small holes, and timely check the tire for cutting and cracking.
(2)勤查氣壓，要按照規定的氣壓給輪胎充氣，在冷態及一定載荷下定期檢查和調整輪胎的氣壓。
(2) check the air pressure frequently, inflate the tire according to the specified pressure, and regularly check and adjust the tire pressure under the cold state and certain load.
(3)勤挖石子，要不時剔除潛在胎紋之間的碎石、玻璃和金屬片，如果傷口過大，應及時更換新的輪胎。
(3) dig stones frequently, and remove the gravel, glass and metal pieces between the potential tire lines from time to time. if the wound is too large, replace the new tire in time.
(4)勤查胎溫，夏季溫度高，避免陽光直射輪胎，不得采用潑涼水或放棄降壓;冬季露天停放時間過長的話，應在輪胎下面墊上模板，起步后要先熱熱車。
(4) check the tire temperature frequently. if the temperature is high in summer, avoid direct sunlight on the tire. it is not allowed to pour cold water or give up the pressure reduction. if the outdoor parking time is too long in winter, the template should be padded under the tire, and the car should be heated after starting.
2、拉高地盤的質量維護。
2. improve the quality of the site maintenance.
提高駕駛技術。平穩起步，盡量避免急加速、急制動和急轉向。遇到石頭或是坑洞、尖銳物品，應減速繞行。
improve driving skills. start smoothly and avoid rapid acceleration, braking and steering as much as possible. when encountering stones, potholes and sharp objects, slow down and detour.
3、合理選擇和搭配輪胎。
3. reasonable selection and matching of tires.
根據作業的車速、路面情況、叉車自重與貨物產生的靜載荷、叉車行駛時的動載荷搭配輪胎。
according to the operating speed, road conditions, forklift weight and the static load generated by the goods, and the dynamic load of the forklift when driving, the tires are matched.
4、防止輪胎超載，貨物要裝在平衡。
4. to prevent overloading of tires, load the goods in balance.
what are the methods to reduce the wear of used electric forklift？
1、加強對輪胎的維護。為了走遠路人們會選擇舒適耐磨的鞋子，那么叉車如果想要維護好，對輪胎的維護至關重要，要做到“四勤”：
1. strengthen the maintenance of tires. in order to walk a long way, people will choose comfortable and wear-resistant shoes. if forklift wants to maintain well, it is very important to maintain the tires, and "four diligence" should be achieved
(1)勤塞小洞，要及時檢查輪胎割破、開裂等情況。
(1) frequently plug small holes, and timely check the tire for cutting and cracking.
(2)勤查氣壓，要按照規定的氣壓給輪胎充氣，在冷態及一定載荷下定期檢查和調整輪胎的氣壓。
(2) check the air pressure frequently, inflate the tire according to the specified pressure, and regularly check and adjust the tire pressure under the cold state and certain load.
(3)勤挖石子，要不時剔除潛在胎紋之間的碎石、玻璃和金屬片，如果傷口過大，應及時更換新的輪胎。
(3) dig stones frequently, and remove the gravel, glass and metal pieces between the potential tire lines from time to time. if the wound is too large, replace the new tire in time.
(4)勤查胎溫，夏季溫度高，避免陽光直射輪胎，不得采用潑涼水或放棄降壓;冬季露天停放時間過長的話，應在輪胎下面墊上模板，起步后要先熱熱車。
(4) check the tire temperature frequently. if the temperature is high in summer, avoid direct sunlight on the tire. it is not allowed to pour cold water or give up the pressure reduction. if the outdoor parking time is too long in winter, the template should be padded under the tire, and the car should be heated after starting.
2、拉高地盤的質量維護。
2. improve the quality of the site maintenance.
提高駕駛技術。平穩起步，盡量避免急加速、急制動和急轉向。遇到石頭或是坑洞、尖銳物品，應減速繞行。
improve driving skills. start smoothly and avoid rapid acceleration, braking and steering as much as possible. when encountering stones, potholes and sharp objects, slow down and detour.
3、合理選擇和搭配輪胎。
3. reasonable selection and matching of tires.
根據作業的車速、路面情況、叉車自重與貨物產生的靜載荷、叉車行駛時的動載荷搭配輪胎。
according to the operating speed, road conditions, forklift weight and the static load generated by the goods, and the dynamic load of the forklift when driving, the tires are matched.
4、防止輪胎超載，貨物要裝在平衡。
4. to prevent overloading of tires, load the goods in balance.
下一篇：威海叉車租賃使用規范